SECTION 06420
PANELWORK

Part 1 - GENERAL

1.01 SECTION INCLUDES

A. Factory manufactured stile and rail wood veneer faced paneling:

1.Wainscotting
2.Full height
3.Accent wall
4.Ceiling
5.Stair wall
6.(          )

B. Base, chair rail, and ceiling molding.

C. Adhesives, caulking, attachments, and trim.

1.02 RELATED SECTIONS

A. Section (       ) - Wall blocking and supplemental framing.
B. Section (       ) - Metal stud framing.
C. Section (       ) - Rough stud framing.
D. Section (       ) - Wall sheathing.
E. Section (       ) - Field Finishing.
F. Section (       ) - (       )

1.03 REFERENCES

A. Architectural Woodwork institute:

1."Architectural Woodwork Quality Standards" 6th Edition V- 1.0

B. Submit product data, shop drawings, samples and certificates under provisions of Section (01300)

1.04 DELIVERY STORAGE AND HANDLING

A. Deliver component parts marked per type as per shop drawings
B. Protect work from damage, especially due to exessive or inadequate relative humidity
C. Maintain relative humidity at the site between 25% and 55% before, during and after installation
D. Components prepackaged in cardboard containers and wood crates

1.05 PROJECT CONDITIONS

A. Field Measurements: Take measurements of actual wall dimensions. Indicate measurements on shop drawings.

B. Place all components in the installation area for at least 48 hours prior to assembly

NEXT (Part2)