The Hyde Park Raised Panel System is available in either 2 Panel or 3 panel configurations.
       

2 - PANEL WALL This means it will require (2) vertical raised panels to cover a full wall.
3 - PANEL WALL This means it will require (3) vertical raised panels to cover a full wall.

With over 36 different sizes in stock , you may choose four heights and nine widths. Hyde Park can guarantee that standard sizes will be shipped quickly, usually within two weeks.

The unique Panelok gridlock can be installed over new or old drywall or plaster, as well as over old wall-coverings and paneling. The Panelok components form a unique gridwork of crosspieces (rails) and uprights (stiles). After the gridwork is completed and the panels are in place, special molding is applied to lock each panel securely in place.

Height Adjustments

When the entire wall is to be covered with paneling, the variation height may be adjusted in three areas:

1. Between the floor and the bottom rail. The bottom rail can be applied to the wall against the floor or it can be raised as much as the base mold will cover. This space is covered and limited only by the size of the base mold.
2. Between the two center rails. Between the top rail of the lower or wainscot section and the bottom rail of the upper section, these can be applied to the wall without a space between them or they can be separated by as much as chair rail will cover. This space is covered and limited only by the size of the chair rail.
3. Between the top rail and the ceiling. This space can be as little as 1/2" to as much as the crown will cover. This space is covered and limited only by the size of the crown mold.

**NOTE - Large nails or screws used to attach the rails to the walls should be applied to areas of the rails covered by base, chair rail, and crown molds.